| Part (Fomoco or Autolite = 60's original part) | Q | $EA |
| Accessory Door edge guard stainless trim 67/68 pr Fomoco | N | 85 |
| Accessory Door edge rubber shipping protector, installed at Factory, normally removed during dealer prep, very rare, pr | N | 27 |
| Accessory Door scuff plate pr (some small blems) | N | 95 |
| Accessory Door scuff plate, installs on top of the rocker area & runs along the length of the door sill plate Mint | N | 110 |
| Accessory Door scuff plate, installs on top of the rocker area & runs along the length of the door sill plate Mint pr | N | 195 |
| Accessory Engine accelerator spring installation tool & Ford instructions | N | 22 |
| Accessory Engine block heater 390/428 200 6 cyl | N | 55 |
| Accessory Flares safety dated December 1966 box of 2 Fomoco | N | 350 |
| Accessory Floormat rear black, vinyl dyed from tan, FoMoCo original, Ford Autolite boxed pr | N | 150 |
| Accessory Floormat rear brown, small blems, FoMoCo original pr | G | 45 |
| Accessory Floormat rear tan, FoMoCo original, Ford Autolite boxed pr | N | 125 |
| Accessory Fog light mount bracket, for use on cars with Dealer installed Fog lights, Fomoco boxed does one pair of lights | N | 125 |
| Accessory Fog light on warning buzzer Fomoco | N | 125 |
| Accessory Gas cap 65/70, this the locking polished stainless version w/2 keys | N | 45 |
| Accessory Headlight auto dimmer assy w/pigtail, fender or grille mounted, very rare option | N | 225 |
| Accessory Headlight auto dimmer kit, complete w/all parts & instructions, VERY rare | N | 125 |
| Accessory Headlight on warning buzzer kit Fomoco | N | 125 |
| Accessory Highway safety kit Fomoco, comlete some box wear | N | 350 |
| Accessory Litter basket underdash hanging Fomoco blk | N | 125 |
| Accessory Mud flaps, polished stainless and rubber original (set of 2) | N | 125 |
| Accessory Mud flaps, polished stainless and rubber original (set of 4) | N | 225 |
| Accessory Parking brake light warning kit - see Parking brake | N | 0 |
| Accessory Radio rear speaker wiring, very rare dual rear speaker harness for monaural radio AM, AM/FM or 8 track, Autolite | N | 65 |
| Accessory Radio Seat speaker kit 67/68 complete w/speaker, grille, fasteners, wiring & instructions, Fomoco boxed | N | 225 |
| Accessory Radio Studiosonic or reverb system on/off switch, floor mounted | R | 49 |
| Accessory Seat head rest kit 65/67 aqua Rotunda, does one seat, w/all attaching hardware & instructions | N | 225 |
| Accessory Seat head rest kit 65/67 black Rotunda, includes Shelby GT350 & GT500, w/all attaching hardware & instructions, pr | N | 495 |
| Accessory Tachometer 6K 100' dial Faria, dash pad, column or console mount, Rotunda | R | 350 |
| Accessory Throttle control kit 65/67 w/original installation instructions, Fomoco | N | 165 |
| Accessory Trailer hitch ball kit 1 7/8" | N | 45 |
| Accessory Vanity mirror original Fomoco boxed 60's original | N | 95 |
| Accessory Vanity mirror, normally mounted to the sunvisor | N | 35 |
| AC blower motor & wheels 66 Factory, 67/68 dealer hang-on ac, Fomoco | N | 95 |
| AC blower motor only 66 Factory, 67/68 dealer hang-on ac, Fomoco | N | 49 |
| AC blower motor resistor assy | R | 35 |
| AC compressor 67 FoMoCo Mint | N | 225 |
| AC compressor anti vibration brace 66/68 289, 289K, 302 Dealer installed 289, 289K, 302 | R | 45 |
| AC compressor clutch brush and holder assy 65/67 Fomoco w/mount bolts/washers | N | 85 |
| AC compressor clutch brush and holder assy 67/73 C7AA 2979-A Fomoco | N | 65 |
| AC compressor clutch field 67 289 GT350, 390, 428GT500 | N | 125 |
| AC compressor clutch field 67 289 GT350, 390, 428GT500 | R | 75 |
| AC compressor clutch pulley bearing bearing 1.18" ID, 2.16" OD | N | 22 |
| AC compressor clutch/pulley 67 289K, Shelby GT350 field clutch version | N | 350 |
| AC compressor clutch/pulley 67 390, 428GT500 brush clutch version | N | 225 |
| AC compressor clutch/pulley 67 390, 428GT500 field clutch version | N | 225 |
| AC compressor clutch/pulley 67 390, 428GT500 field clutch version | R | 125 |
| AC compressor clutch/pulley mount bolt & washer 65/73 Factory original | N | 7 |
| AC compressor gasket & seal kit 65/73 York | N | 35 |
| AC compressor mount brkt 289, 289K lower C7ZA 2882-C b4 1/6/67 Very Rare | R | 195 |
| AC compressor mount brkt 289, 289K, 302 from 1/3/67 to 3/1/68, front lateral | R | 95 |
| AC compressor mount brkt 289, 289K, 302, 351W lower C7AA 2882-L from 1/6/67 | R | 95 |
| AC compressor mount brkt 390GT, 428GT500 front lateral 67 | R | 175 |
| AC compressor mount brkt 390GT, 428GT500, 428CJ lower | R | 175 |
| AC compressor seal kit 65/69 York | N | 27 |
| AC compressor seal kit 67/68 Tecumseh | N | 27 |
| AC compressor valve low pressure Fomoco replacement | N | 65 |
| AC condensor 67/68 Factory original, show quality, pressure checks good, date code 5/67 | R | 295 |
| AC drain hose 67/70 Ford service Mint | N | 27 |
| AC dryer 67/68 Factory original, Show Quality, C7ZA Fomoco tag is intact, ready for show & go | R | 225 |
| AC dryer 67/68 USA made, Factory original quality replacement | O | 95 |
| AC evaporator assy 67/68 Factory original w/rubber pads & Engineering number tags | R | 195 |
| AC evaporator case damper door 67/68 | R | 35 |
| AC evaporator case damper door 67/68(air inlet) | R | 35 |
| AC evaporator case damper door stop lower 67/68, galvanized steel panel | R | 35 |
| AC evaporator case damper door stop upper 67/68, galvanized steel panel | R | 35 |
| AC evaporator case mouting bracket 67/68, located at top/firewall, w/mounting bolts | R | 35 |
| AC heater blower housing assy 67/68 Mint 2 piece assy | R | 145 |
| AC heater box case retainer clips 67/73 | N | 5 |
| AC heater box case retainer clips 67/73 | R | 3 |
| AC heater box case retainer clips 67/73 (set of 6) | N | 25 |
| AC heater box case retainer clips 67/73 (set of 6) | R | 15 |
| AC high idle PCV valve 289, 390GT, 428GT500 | G | 55 |
| AC hose 67/68 integral, discharge, compressor to condensor, 13/32" diameter x 26" long, Factory new car takeoff C7ZE, Nice | R | 250 |
| AC hose 67/68 integral, discharge, compressor to condensor, 13/32" diameter x 26" long, Ford Service part, Nice | N | 250 |
| AC hose 67/68 integral, liquid steel tube adaptor, 2 female pipe thread swivel connectors, adapts hose to condensor, Factory original | R | 95 |
| AC hose 67/68 integral, liquid, dryer to evaporator, 5/16" diameter x 74" long, V8 & 6 cyl Factory original new car takeoff, Nice | R | 295 |
| AC hose 67/68 integral, suction, evaporator to compressor, .5" diameter x 55" long, V8 Factory original new car takeoff, Nice | R | 295 |
| AC hose 67/68 integral, suction, evaporator to compressor, .5" diameter x 26" long, 6 cyl Mint | N | 125 |
| AC hose 67/68 integral, suction, evaporator to compressor, .5" diameter x 26" long, 6 cyl, Factory original new car takeoff, Nice | R | 95 |
| AC hose firewall metal cover 67/68, 2 piece, Factory original w/mounting fasteners | R | 45 |
| AC hose firewall metal cover rubber gasket 67/68 Factory original | R | 45 |
| AC hose radiator support foam gasket 67/68 w/integral AC, Factory original | R | 35 |
| AC hot water valve 67/68 FoMoCo, Nice | N | 225 |
| AC hot water valve 67/68 Motorcraft replacement, great for local show and driver car with working AC | N | 65 |
| AC idler 289 67 dealer ac lh (upper) adjustable Autolite | N | 55 |
| AC idler 289 67 fixed, used from 3/1/67 and retro fit to those b4 | R | 75 |
| AC idler 289, 302 67/68 w/Factory ac b4 3/1/68 rh (lower) fixed Autolite | R | 75 |
| AC idler 289, 302 67/68 w/Factory ac b4 3/1/68 rh (lower) fixed Autolite, no pulley just the bracket | N | 65 |
| AC idler 289, 302 67/68 w/Factory ac from 1/3/67 to 3/1/68 lh (upper) adjustable Fomoco | N | 125 |
| AC idler 390GT, 428GT500 67 w or wo/TE w/factory ac rh (lower fixed) Autolite | N | 125 |
| AC idler 390GT, 428GT500 67 w or wo/TE w/factory ac rh (lower fixed) Autolite | R | 95 |
| AC idler 390GT, 428GT500 67 wo/TE, lh (upper adjustable) | N | 175 |
| AC idler 390GT, 428GT500 67 wo/TE, lh (upper adjustable), rebuilt w/NOS bearing | R | 125 |
| AC idler pulley (pulley only) 66/69 289, 302, 67 390 | N | 35 |
| AC kit 67 289 for Dealer installed system, compressor mount & top vibe brkt, PS brkt, adj idler | R | 165 |
| AC temp control switch assy 67 | R | 35 |
| AC temp control thermostat assy 67/70 | R | 65 |
| AC vacuum can 67/68 USA made Factory original original quality | O | 75 |
| AC vacuum hose check valve 2 port Factory original 67/70 | N | 65 |
| AC vacuum servo motor 67/68, controls air doors for plenum chamber, evaporator core & blower motor, work like new | R | 45 |
| AC vacuum switch 67/73 heater servo control switch, also used on 69/70 power ventilation | N | 50 |
| AC vacuum switch 67/73 heater servo control switch, also used on 69/70 power ventilation | R | 35 |
| Accelerator pedal 65/68 w/stainless trim | N | 95 |
| Accelerator pedal 65/68 w/stainless trim perfect for Thoroughbred or Unrestored car | R | 65 |
| Accelerator pedal arm assy w/mnt brkt 65 V8 all trans, 66/68 289, 289K, 302 w/man trans, 67/68 390, 428 w/man trans | R | 65 |
| Accelerator pedal linkage seal, firewall mounted 67/68 | N | 22 |
| Accelerator pedal mount bolt 65/70 | R | 4 |
| Accelerator pedal mount bolt 65/70 | N | 6 |
| Accelerator pedal spring 65/67 | N | 5 |
| Accelerator pedal trim 65/68 b4 4/25/68 | R | 25 |
| Accelerator return spring 260, 289, 289K, 390GT, 428CJ .701"-1.74" 15 coils | N | 33 |
| Accelerator return spring 428GT500 .55"-3.52" 60 3/4 coils | R | 39 |
| Accelerator return spring brkt 428GT500 | R | 55 |
| Accelerator rod 428GT500 11" long, w/clip & threaded bail | R | 65 |
| Accelerator rod clevis lh Fomoco | N | 4 |
| Accelerator rod clip rod to carb 65/68 | N | 4 |
| Accelerator rod grommet 260, 289, 289K, 302, 390GT, 428GT500, 428GT500KR, 428CJ, Factory original | N | 7 |
| Alternator bearing 38/42/45/55/60 amp | N | 12 |
| Alternator brkt adj 170, 200 wo/ac | R | 35 |
| Alternator brkt adj 289, 289K & 302 w/Thermactor & 1969 302 Boss, C6OE | R | 75 |
| Alternator brkt adj 289, 289K, 302 | R | 49 |
| Alternator brkt adj 390GT, 428GT500 w/TE | R | 65 |
| Alternator brkt adj 390GT, 428GT500 wo/TE | R | 75 |
| Alternator brkt adj mount bolt, connects adjuster bracket to engine, Factory | R | 7 |
| Alternator brkt adj mount bolt, connects alternator to adjuster bracket, Factory | R | 7 |
| Alternator brkt mount 289, 289K, 302 b4 3/1/68 | R | 45 |
| Alternator brkt mount 390GT, 428GT500 w/TE | R | 75 |
| Alternator brkt mount 390GT, 428GT500 wo/TE | N | 150 |
| Alternator brkt mount 390GT, 428GT500 wo/TE Mint | R | 95 |
| Alternator diodes Autolite | N | 5 |
| Alternator field coil Motorcraft | N | 65 |
| Alternator mount bolt 66/69 289,289K,302,351W,390GT,428GT500,428GT500KR,428CJ,428SCJ,5 3/4" Factory original w/lockwasher | R | 9 |
| Alternator mount spacer 289, 289K, 302, 302 Boss, Gold | R | 22 |
| Alternator mount spacer 390GT, 428CJ, 428SCJ, 428GT500, Pink | R | 22 |
| Alternator pulley 65/68 289 & 302 w/ac, 390GT, 428GT500, 428CJ, Factory original gold cad 2 row w/C5AF stamping | N | 125 |
| Alternator pulley 65/68 289 & 302 w/ac, 390GT, 428GT500, 428CJ, Factory original gold cad 2 row w/C5AF stamping, Nice | R | 65 |
| Alternator rectifier kit Autolite | N | 45 |
| Alternator rotor assy 65/73 45A, 55A, 60A & 61A, correct for 302 Boss, 390GT, 428GT500, 428CJ, 428SCJ, 429 | N | 45 |
| Alternator stator/field coil 1968 Autolite | N | 75 |
| Alternator wiring access cap, 67/73, 7/8" black plastic, Factory original | R | 7 |
| Backup light assy 67/68 Factory quality chrome base, OEM style gray body seal, NOS Fomoco frosted lens & gasket, Show quality pr | O | 150 |
| Backup light assy 67/68 Factory quality chrome base, OEM style gray body seal, NOS Fomoco frosted lens & gasket, Show quality lh | O | 85 |
| Backup light assy 67/68 Factory quality chrome base, OEM style gray body seal, NOS Fomoco frosted lens & gasket, Show quality rh | O | 85 |
| Backup light assy mount bolt alignment spacer 65/73 (slotted) | G | 2 |
| Backup light assy seal 67/70 installed between rear valance and backup light light body, correct gray color, Factory original quality, pr | O | 9 |
| Backup light lens 65/68 Factory original "frosted" lens Fomoco(Ford replacements & repro are clear) | N | 27 |
| Backup light lens 65/68 Factory original "frosted" lens Fomoco(Ford replacements & repro are clear) pr | N | 49 |
| Backup light lens gasket 65/70 Factory original | N | 7 |
| Backup light lens gasket 65/70 Factory original pr | N | 12 |
| Backup light switch 67/68 3 spd Autolite | N | 95 |
| Backup light switch 67/68 3 spd Autolite | R | 55 |
| Backup light switch 67/68 4 spd | N | 175 |
| Battery cable 67/69 Negative C7AF 14301-A Autolite Factory original,302 Boss,390GT,Shelby GT350 & GT500,428CJ,429 Boss Mint | R | 250 |
| Battery cable, NEG mount stud, nut & lock washer, block mounted, auto trans cars w/cooling line route brkt | R | 22 |
| Battery hold down clamp 67/69 group 22, 24, 27, 29, also correct for 1970 GT350 and GT500, Factory original | N | 95 |
| Battery hold down clamp 67/69 group 22, 24, 27, 29, also correct for 1970 GT350 and GT500, Factory original w/small blems | R | 22 |
| Battery hold down clamp bolt original 67/69 C5AZ pr | N | 39 |
| Battery hold down clamp nut 67/73 original w/captured washer, pr | R | 7 |
| Battery hold down clamp nut 67/73 original w/captured washer, pr | N | 9 |
| Battery tray 67/70 group 22, includes 302 Boss, not reproduced or serviced by Ford, Very rare, show quality | R | 225 |
| Battery tray 67/70 group 24 driver quality original | G | 35 |
| Battery tray 67/70 group 24 show quality original | R | 125 |
| Battery tray mount bolts 67/70 correct gold cad color with LF logo on head, Mint pr | N | 5 |
| Battery tray support panel 67/70, mounted under fender apron, various dates, Mint | R | 59 |
| Brake and clutch pedal support 67/68 w/power brakes, pedal shaft bushings are good | R | 175 |
| Brake and clutch pedal support 67/68 wo/power brakes, pedal shaft bushings are good | R | 125 |
| Brake disc caliper bleeder 65/67 Factory | N | 12 |
| Brake disc caliper bleeder 65/67 Factory pr | N | 22 |
| Brake disc caliper bolt 67, 1/2 inch w/Hex head, required to assemble caliper halves, pr | N | 10 |
| Brake disc caliper bolt lockwasher 65/67 1/2 inch pr | N | 2 |
| Brake disc caliper bolt lockwasher 65/67 1/2 inch set of 4 | N | 3 |
| Brake disc caliper crossover tube 65/67 stainless pr | O | 22 |
| Brake disc caliper crossover tube 65/67 USA made Factory original quality pr | O | 22 |
| Brake disc caliper mount backet mount bolt 67 long, 1 needed per side | R | 17 |
| Brake disc caliper mount backet mount bolt 67 short, 3 needed per side | R | 12 |
| Brake disc caliper mount bolt 67 | R | 17 |
| Brake disc caliper mount bracket w/bolts 67 pr includes Shelby GT350 & GT500 | R | 150 |
| Brake disc caliper pad 65/67 includes GT350, GT500, Factory original Autolite w/KH casting (set of 4) | N | 225 |
| Brake disc caliper pad 65/67 includes GT350, GT500, Factory original Fomoco w/KH casting (set of 2) | N | 125 |
| Brake disc caliper pad 65/67 includes GT350, GT500, riveted Bendix service version (set of 4) | N | 45 |
| Brake disc caliper pad 65/67 includes GT350, GT500, riveted Ford service version (set of 2) | N | 40 |
| Brake disc caliper pad 65/67 includes GT350, GT500, riveted Ford service version (set of 4) | N | 75 |
| Brake disc caliper piston 67 also correct for Shelby GT350 & GT500 | N | 35 |
| Brake disc caliper piston 67 also correct for Shelby GT350 & GT500 set of 4 | N | 125 |
| Brake disc caliper piston 67 also correct for Shelby GT350 & GT500 set of 8 | N | 225 |
| Brake disc caliper piston seal kit 67, does one caliper | N | 35 |
| Brake disc caliper piston seal kit 67, does two calipers | N | 65 |
| Brake disc caliper piston seal kit 67, does two calipers, OEM | N | 29 |
| Brake disc rotor hub 67/69 Fomoco original, Mint, hub only | R | 65 |
| Brake disc rotor hub 67/69 Fomoco original, Mint, hub only, pr | R | 110 |
| Brake disc rotor splash shield 67 pr Fomoco original | R | 195 |
| Brake disc rotor splash shield 67 lh Fomoco original | R | 110 |
| Brake disc rotor splash shield 67 rh Fomoco original | R | 110 |
| Brake drum front 67/69 289, 289K, 302, 390, 390GT, 428CJ, 428SCJ 10 x 2 1/2" Fomoco original w/fresh turn | R | 125 |
| Brake drum front 67/69 289, 289K, 302, 390, 390GT, 428CJ, 428SCJ 10 x 2 1/2" Fomoco original w/fresh turn pr | R | 225 |
| Brake drum rear 65/73 289, 302, 351, 65/66 V8, 67 & 68 GT350, 390, 428 GT500, GT500KR, 10" x 2" surface | N | 250 |
| Brake drum rear 65/73 289, 302, 351, 65/66 V8, 67 & 68 GT350, 390, 428 GT500, GT500KR, 10" x 2" surface pr | N | 450 |
| Brake drum rear 65/73 289, 302, 351, 65/66 V8, 67 & 68 GT350, 390, 428 GT500, GT500KR, 10" x 2" surface Factory orig. dual rib | N | 375 |
| Brake drum rear 65/73 289, 302, 351, 65/66 V8, 67 & 68 GT350, 390, 428 GT500, GT500KR, 10" x 2" surface Factory orig. dual rib, pr | N | 695 |
| Brake drum backing plate front 10" x 2 1/4" 65/69 lh Fomoco | R | 95 |
| Brake drum backing plate front 10" x 2 1/4" 65/69 rh Fomoco | R | 95 |
| Brake drum backing plate front 9" x 2 1/4" 67/70 lh FoMoCo stamping Mint | R | 95 |
| Brake drum backing plate front 9" x 2 1/4" 67/70 rh FoMoCo stamping Mint | R | 95 |
| Brake drum backing plate front gasket 67/73 Fomoco, not serviced by Ford | x | 5 |
| Brake drum backing plate front gasket 67/73 Fomoco, not serviced by Ford, pr | x | 7 |
| Brake drum backing plate front mount bolt/nut Factory original set of 4(3 short, 1 long) 65/69 | R | 12 |
| Brake drum backing plate front mount bolt/nut Factory original set of 8(6 short, 2 long) 65/69 | R | 19 |
| Brake drum backing plate hole cover plug 65/73, Factory original embossed 8A -2092 Fomoco | N | 14 |
| Brake drum backing plate hole cover plug 65/73, Factory original embossed 8A -2092 Fomoco pr | N | 24 |
| Brake drum cylinder bleeder (drum front or rear) Factory correct small 1/4" hex nut syle pr | N | 22 |
| Brake drum cylinder front 65/69 2 1/4" x 10", 70/71 2 1/4" x 10" and 2 1/2" x 10" pr | N | 125 |
| Brake drum cylinder front 65/69 2 1/4" x 10", 70/71 2 1/4" x 10" and 2 1/2" x 10" lh | N | 65 |
| Brake drum cylinder front 65/69 2 1/4" x 10", 70/71 2 1/4" x 10" and 2 1/2" x 10" lh Factory original | R | 65 |
| Brake drum cylinder front 65/69 2 1/4" x 10", 70/71 2 1/4" x 10" and 2 1/2" x 10" rh | N | 65 |
| Brake drum cylinder front 65/69 2 1/4" x 10", 70/71 2 1/4" x 10" and 2 1/2" x 10" rh Factory original | R | 65 |
| Brake drum cylinder front gasket, 9" brakes only, Factory original, not serviced by Ford, pr | R | 7 |
| Brake drum cylinder front kit 65/69 2 1/4" x 10", 70 2 1/4" x 10" & 2 1/2" x 10" | N | 22 |
| Brake drum cylinder front kit 65/69 2 1/4" x 10", 70 2 1/4" x 10" & 2 1/2" x 10", pr | N | 39 |
| Brake drum cylinder mount bolt w/star washer, 65/70 Factory original | R | 7 |
| Brake drum cylinder mount bolt w/star washer, 65/70 Factory original pr | R | 12 |
| Brake drum cylinder rear 66 289 from 4/15/66 pr, 67 289 4V GT, 68/69 302/351, 70/71 302 w/small bleeder & 2 green paint daubs | N | 185 |
| Brake drum cylinder rear 66 289 from 4/15/66 lh, 67 289 4V GT lh or rh, 68/69 302/351lh, 70/71 302 lh w/small bleeder & 2 grn pt dbs | N | 99 |
| Brake drum cylinder rear 66 289 from 4/15/66 rh, 68/69 302/351 rh, 70/71 302 rh w/small bleeder & 2 green paint daubs | N | 99 |
| Brake drum cylinder rear 67/68 390, 428GT500, 428GT500KR pr w/correct small bleeder & 1 white paint daub | N | 250 |
| Brake drum cylinder rear 67/68 390, 428GT500, 428GT500KR lh or rh w/correct small bleeder & 1 white paint daub | N | 135 |
| Brake drum cylinder rear kit 27/32" 66/70 6 cyl | N | 17 |
| Brake drum cylinder rear kit 27/32" 66/70 6 cyl pr | N | 29 |
| Brake drum cylinder rubber boot, Kelsey Hayes Factory original (set of 4) | N | 45 |
| Brake drum shoe attaching parts kit, Complete set of Concours components,10",does both sides,front | N | 250 |
| Brake drum shoe attaching parts kit, Complete set of Concours components,10",does both sides,rear(individual prices total $430) | N | 325 |
| Brake drum shoe front 65/66 V8, 67/68 289, 302 & 69/71 6cyl, 302 b4 10/20/70, full set, Bendix w/Ford logo | N | 65 |
| Brake drum shoe rear 67/68 289, 289K, 302, 390GT, 428GT500, 428GT500KR, 428CJ 10" x 1 3/4" pr | N | 150 |
| Brake drum shoe rear 67/68 289, 289K, 302, 390GT, 428GT500, 428GT500KR, 428CJ 10" x 1 3/4" pr Ford rebuilt | N | 95 |
| Brake drum shoe adjuster cable 10" brakes | N | 12 |
| Brake drum shoe adjuster cable 10" brakes | R | 8 |
| Brake drum shoe adjuster cable 9" brakes | N | 12 |
| Brake drum shoe adjuster cable guide | N | 11 |
| Brake drum shoe adjuster cable guide | R | 7 |
| Brake drum shoe adjuster cable guide pr | R | 12 |
| Brake drum shoe adjuster kit - screw, nut and cap lh 10" front and rear | N | 25 |
| Brake drum shoe adjuster kit - screw, nut and cap lh 10" front and rear | R | 15 |
| Brake drum shoe adjuster kit - screw, nut and cap rh 10" front and rear | N | 25 |
| Brake drum shoe adjuster kit - screw, nut and cap rh 10" front and rear | R | 15 |
| Brake drum shoe adjuster kit - cable, routing bracket and adjuster lever 10" front or rear | N | 27 |
| Brake drum shoe adjuster kit - cable, routing bracket and adjuster lever 10" front or rear, pr | N | 49 |
| Brake drum shoe adjuster kit - cable, routing bracket and adjuster lever 9" front or rear | N | 27 |
| Brake drum shoe adjuster kit - cable, routing bracket and adjuster lever 9" front or rear, pr | N | 49 |
| Brake drum shoe adjuster lever 10" lh | R | 8 |
| Brake drum shoe adjuster lever 10" lh | N | 12 |
| Brake drum shoe adjuster lever 10" rh | R | 8 |
| Brake drum shoe adjuster lever 10" rh | N | 12 |
| Brake drum shoe adjuster lever 9" lh | R | 8 |
| Brake drum shoe adjuster lever 9" rh | R | 8 |
| Brake drum shoe adjuster screw lh | N | 11 |
| Brake drum shoe adjuster screw rh | N | 11 |
| Brake drum shoe adjuster screw nut lh 10" front and rear | N | 12 |
| Brake drum shoe adjuster screw nut rh 10" front and rear | N | 12 |
| Brake drum shoe adjuster screw socket 10" front and rear | R | 4 |
| Brake drum shoe adjuster screw socket 10" front and rear | N | 6 |
| Brake drum shoe adjuster screw spring 10" brakes, dark green, 65/66 GT350 replacement | N | 9 |
| Brake drum shoe adjuster screw spring 10" brakes, dark green, 65/66 GT350 replacement pr | N | 17 |
| Brake drum shoe adjuster screw spring 9" 65/70 6 cylinder, green, Factory original | R | 9 |
| Brake drum shoe adjuster screw washer 65/73 flat, black | N | 1 |
| Brake drum shoe anchor/guide plate 9", 10", one used per wheel each | N | 7 |
| Brake drum shoe anchor/guide plate 9", 10", one used per wheel each, Factory original | N | 17 |
| Brake drum shoe anchor/guide plate 9", 10", one used per wheel, pr | N | 12 |
| Brake drum shoe anchor/guide plate 9", 10", one used per wheel, pr, Factory original | N | 29 |
| Brake drum shoe lining kit, front 67/70 351& BB, Rear 68/71 428CJ, 429 Boss, 429CJ 2 1/2" x 10" | N | 49 |
| Brake drum shoe lining kit, front 67/70 351& BB, Rear 68/71 428CJ, 429 Boss, 429CJ 2 1/2" x 10" FoMoCo logo on lining | N | 75 |
| Brake drum shoe lining kit, rear 67/68 289, 302, 390GT, 428CJ & 65/66 V8 Factory original "FoMoCo" logo10" x 1 3/4"(set of 4) | N | 125 |
| Brake drum shoe link, cylinder to shoe (set of 2) Fomoco | N | 17 |
| Brake drum shoe link, cylinder to shoe (set of 4) Fomoco | N | 32 |
| Brake drum shoe link, cylinder to shoe (set of 4) Fomoco | R | 17 |
| Brake drum shoe parking brake lever 10" lh 65/73 Ford replacement | N | 39 |
| Brake drum shoe parking brake lever 10" rh 65/73 Ford replacement | N | 39 |
| Brake drum shoe parking brake lever retainer 9" & 10" | N | 2 |
| Brake drum shoe parking brake lever retainer spring 9" & 10" | N | 4 |
| Brake drum shoe parking brake link (parking brake lever to primary shoe) 10" 65/70 Fomoco Bendix original | R | 35 |
| Brake drum shoe parking brake link (parking brake lever to primary shoe) 10" 65/70 Fomoco Bendix original pr | R | 65 |
| Brake drum shoe parking brake link (parking brake lever to primary shoe) 10" 65/73 Ford service part, pr | N | 45 |
| Brake drum shoe parking brake link spring 10" red 65/72 | N | 11 |
| Brake drum shoe retainer pin 65/73 front 10", rear 10" x 2 1/2" Factory correct "6" stamp (set of 4) | N | 22 |
| Brake drum shoe retainer pin 65/73 front 10", rear 10" x 2 1/2" Factory correct "6" stamp each | N | 6 |
| Brake drum shoe retainer pin 65/73 front 10", rear 10" x 2" (set of 4) | N | 14 |
| Brake drum shoe retainer pin 65/73 front 10", rear 10" x 2" each | N | 4 |
| Brake drum shoe retainer pin 65/73 front 10", rear 10" x 1 3/4" Factory correct "8" stamp | N | 4 |
| Brake drum shoe retainer pin 65/73 front 10", rear 10" x 1 3/4" Factory correct "8" stamp (set of 4) | N | 14 |
| Brake drum shoe retainer spring cup (set of 4) | N | 7 |
| Brake drum shoe retainer spring primary 10" | N | 9 |
| Brake drum shoe retainer spring secondary 10" black | N | 9 |
| Brake drum shoe retainer spring secondary 10" black | R | 5 |
| Brake drum shoe return spring 65/70 front or rear drum shoe to shoe blue, very rare | R | 22 |
| Brake drum shoe return spring 65/70 front or rear drum shoe to shoe blue, very rare, pr | R | 35 |
| Brake drum shoe return spring 65/70 front or rear drum shoe to shoe blue, very rare, pr | N | 45 |
| Brake drum shoe return spring 65/70 front or rear drum shoe to shoe red, very rare, pr | N | 45 |
| Brake drum shoe return spring 65/71 10" brks front or rear primary green | R | 8 |
| Brake drum shoe return spring 65/71 10" brks front or rear primary green | N | 12 |
| Brake drum shoe return spring 65/73 10" brks front or rear secondary yellow | R | 7 |
| Brake drum shoe return spring 65/73 10" brks front or rear secondary yellow pr | N | 12 |
| Brake drum shoe return spring 65/73 lt blue | N | 7 |
| Brake hose drum clip pr, correct red oxide finish | N | 15 |
| Brake hose drum clip, correct red oxide finish | N | 7 |
| Brake hose drum clip, correct red oxide finish | R | 4 |
| Brake hose front disc 67 Factory original Fomoco date Sept 66, pr | R | 195 |
| Brake hose front disc 67 OEM, just like Factory original, sorry no Ford engineering number, pr | O | 65 |
| Brake hose front drum mount bracket 67/70 lh or rh, pr w/mount bolts | R | 39 |
| Brake hose front drum mount bracket 67/70 lh or rh, w/mount bolt | R | 22 |
| Brake hose rear 67/68 all except CJ C8ZA 2A448-A, date 13 September 67, very nice Fomoco original w/small blems | R | 75 |
| Brake hose rear 67/68 all except CJ, exact replacement, USA made Factory original, no Ford logo or engineering number | N | 65 |
| Brake hose washer 64 1/2 - 73, includes disc & drum brake hoses, copper original pr | N | 2 |
| Brake light switch 65/66 & 67 wo/PB b4 1/7/67 Autolite | N | 45 |
| Brake light switch 65/66 & 67 wo/PB b4 1/7/67 Fomoco | R | 35 |
| Brake light switch 67 power or disc brakes Autolite C7ZB | R | 35 |
| Brake light switch 67/70 non power brakes | N | 19 |
| Brake light switch 67/70 non power brakes Autolite | R | 19 |
| Brake master cylinder disc 67 Factory original, embossed Bendix Logo & #2227161, no groove at base, fitting hole size different | R | 250 |
| Brake master cylinder drum 67/70 w/power brakes, rebuilt, correct Bendix logo | N | 125 |
| Brake master cylinder cap 67 disc, Factory original with correct decal | R | 175 |
| Brake master cylinder cap 67/70 drum brakes stamped "SAE 70R3" | N | 45 |
| Brake master cylinder cap gasket 67/73 disc original Factory original w/Bendix Logo | R | 12 |
| Brake master cylinder cap gasket 67/73 disc original Factory original w/Bendix Logo | N | 22 |
| Brake master cylinder cap gasket 67/73 drum brakes | N | 10 |
| Brake master cylinder cap gasket 67/73 drum brakes Fomoco | N | 12 |
| Brake master cylinder cap retainer 67/73 disc and or power brakes | N | 7 |
| Brake master cylinder cap retainer 67/73 disc and or power brakes | N | 10 |
| Brake master cylinder cap retainer 67/73 drum brakes | N | 7 |
| Brake master cylinder mount nut 67/73 pr | N | 7 |
| Brake master cylinder rebuild kit 67 disc Fomoco | N | 40 |
| Brake master cylinder rebuild kit 67/68 drum brakes, original version | N | 22 |
| Brake master cylinder rebuild kit 67/70 drum brakes | N | 22 |
| Brake pedal 67 disc & power drum, 4spd | R | 195 |
| Brake pedal 67 disc & power drum, auto | N | 225 |
| Brake pedal master cylinder pin/rod retainer 65/73 | R | 4 |
| Brake pedal master cylinder pin/rod spacer 65/73, original small white plastic | R | 4 |
| Brake pedal master cylinder pin/rod spacer 65/73, original small white plastic, pr | R | 7 |
| Brake pedal mount bolt, nut, bushing/spacer & bevel tension washer 67/70 w/disc or power drum, includes 429 Boss | R | 35 |
| Brake pedal pad auto trans 65/67 disc correct slight wear for original car | R | 27 |
| Brake pedal pad auto trans 65/67 disc, inlcudes 67 & 68 Shelby GT350, GT500 & GT500KR | N | 49 |
| Brake pedal pad man trans 65/70 std brakes from 8/17/64 | R | 15 |
| Brake pedal pad man trans 65/70 std brakes from 8/17/64 | N | 25 |
| Brake pedal pad man trans 65/73 disc from 3/8/65 slight wear correct original car | G | 27 |
| Brake pedal pad trim cover auto trans 65/67 Mint | R | 45 |
| Brake pedal pad trim cover man trans 65/70 | N | 65 |
| Brake pedal pad trim cover man trans 65/70 Mint | R | 45 |
| Brake pedal pin/shaft 66/67 w/cotter key & washer, used on automatic transmission cars | R | 35 |
| Brake power booster 67 disc Midland/Ross Fomoco, includes GT350 & GT500, rebuilt with a show finish | R | 325 |
| Brake power booster filter 67/69 for Midland booster only, installed between aluminum & plastic spacer plates | N | 12 |
| Brake power booster ID tag 67 Midland booster Factory disc brake, C7ZZ 2005-G RARE | R | 49 |
| Brake power booster mount nut set of 4, 67/73 | R | 12 |
| Brake power booster rod 67/69 master cylinder to booster(Midland) | N | 45 |
| Brake power booster rod 67/69 master cylinder to booster(Midland) | R | 35 |
| Brake power booster rod boot, pedal side 65/70 Factory original | R | 22 |
| Brake power booster spacer plate 67/70 booster to master cylinder, aluminum part, for Midland boosters | R | 27 |
| Brake power booster spacer plate 67/70 booster to master cylinder, aluminum part, for Midland boosters | N | 35 |
| Brake power booster vacuum check valve 67/69(69 Midland only) Factory original white plastic w/red paint daub & 2 ports | R | 65 |
| Brake power booster vacuum check valve 67/69(69 Midland only) OEM replacement, black plastic 2 ports | R | 17 |
| Brake power booster vacuum check valve rubber grommet seal 65/67 ID 7/8", OD 1 5/16" | N | 9 |
| Brake power booster vacuum hose clamp, booster end, crimp style with .745 stamp, Factory original | N | 22 |
| Brake power booster vacuum hose clamp, booster end, crimp style with .745 stamp, Factory original pr | N | 39 |
| Brake power booster vacuum tube 67 428GT500, connects intake manifold brass fitting to rubber hose, Mint original | N | 75 |
| Brake power booster vacuum tube 67/69 390GT, 428CJ, 428SCJ, connects intake manifold brass fitting to rubber hose, Mint original | R | 65 |
| Brake valve front disc pressure control 67/69 includes 302 Boss, 429 Boss, Shelby GT350 & GT500, Mint C7OE Factory original | R | 350 |
| Brake warning light switch 67/68 (single pin) includes Shelby GT350, GT500 Autolite, Mint working original | R | 65 |
| Brake warning light switch 67/68 (single pin) includes Shelby GT350, GT500, Factory original white plastic | N | 85 |
| Bumper 65/69 mount bolt, original | N | 12 |
| Bumper 65/69 mount bolt, original (set of 4) Mint | R | 49 |
| Bumper 65/70 rear mount bracket mount bolt, Factory original set of 4 | R | 22 |
| Bumper 65/73 rear mount bolts/washers, original (set of 4) | G | 12 |
| Bumper 67/68 front includes Shelby, Best look & Fit available! This is a show quality part! | O | 95 |
| Bumper 67/68 front attachment brkt fender lh | N | 12 |
| Bumper 67/68 front attachment brkt fender rh | N | 12 |
| Bumper 67/68 front attachment brkt inner lh | N | 85 |
| Bumper 67/68 front attachment brkt inner rh | N | 85 |
| Bumper 67/68 front attachment brkt outer lh | N | 65 |
| Bumper 67/68 front attachment brkt outer lh | G | 27 |
| Bumper 67/68 front attachment brkt outer rh | N | 65 |
| Bumper 67/68 rear includes Shelby, Best look & Fit available! This is a show quality part! | O | 95 |
| Bumper 67/68 rear mount bracket includes Shelby, Factory original black bracket with silver cad captured nut | N | 55 |
| Bumper 67/68 rear mount bracket includes Shelby, Factory original black bracket with silver cad captured nut | R | 35 |
| Bumper 67/68 rear mount bracket includes Shelby, Factory original black bracket with silver cad captured nut, pr | N | 99 |
| Bumper 67/68 rear mount bracket includes Shelby, Factory original black bracket with silver cad captured nut, pr | R | 65 |
| Bumper 67/70 front attachment bracket bolts (set of 4) | R | 14 |
| Bumper spring washer 65/70, attached between bumper & bumper mount bracket, Factory original set of 4, not serviced by Ford | R | 22 |
| Bumperette 67 front lh (w/pad version) b4 5/8/67 Fomoco, pad not included, Chrome | N | 125 |
| Bumperette 67 front rh (w/pad version) b4 5/8/67 Fomoco, pad not included, Chrome | N | 125 |
| Bumperette 67/68 front pad | N | 27 |
| Bumperette 67/68 front pad pr | N | 49 |
| Bumperette 67/68 front lh (w/pad version) from 5/8/67 Fomoco, pad not included, painted | N | 65 |
| Bumperette 67/68 front rh (w/pad version) from 5/8/67 Fomoco, pad not included, painted | N | 65 |
| Bumperette 67/68 rear mount bracket w/bolt | R | 45 |
| Bumperette 67/68 rear painted | N | 55 |
| Bumperette 67/68 rear painted pr | N | 95 |
| Bumperette 67/68 rear painted w/rubber pad | R | 65 |
| Bumperette 67/68 rear painted w/rubber pad pr | R | 110 |
| Circuit breaker 65/73 convertible top control 20A Red | N | 35 |
| Circuit breaker 67 AC 25A Red/Yellow Fomoco | N | 22 |
| Circuit breaker 67 AC 25A Red/Yellow Fomoco | N | 35 |
| Clutch disc 65/67 289K, 69/70 302 Boss 10 1/2", new car takeoff, checks good at clutch rebuilders | R | 125 |
| Clutch disc 66/67 289 10" Fomoco | N | 95 |
| Clutch disc 67 390GT 11 1/2" | N | 165 |
| Clutch disc 67/70 200 w/3.03 3 spd 9", 1 1/16", 10 spline | N | 125 |
| Clutch disc 67/71 428GT500, 428GT500KR, 428CJ, 428SCJ, 429 Boss, 429CJ, 428SCJ, 11 1/2" | N | 250 |
| Clutch fork 200, 67/68 b4 2/15/68 3.03 | N | 110 |
| Clutch fork 289, 302 9 1/4" b4 2/15/68 | N | 85 |
| Clutch fork 289K, 390GT, 12" b4 2/15/68 Mint | R | 225 |
| Clutch fork anti rattle spring 65/68 all | N | 7 |
| Clutch fork dust cover/boot rubber 170, 200 | N |